iGrafx Automation Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
==== Description ====

TIM automatically creates and archives in the tim.properties file in the JBoss directory under

<code>
 jboss<versionstandaloneconfiguration
</code>

All parameters that differ from the standards can be changed here. This page describes all possible options.

<note tip> If changes were made to the file, the server must either be restarted or [[:en:software:tim:alive_servlet|these instructions]] must be followed.</note>

==== Description of the Most Important Parameters ====

== version ==

This parameter tells which version is currently in the system. A changelog for the user's version is found [[:en:software:tim:changelog|here]]. Changes should not be made to this so that the current status can be defined.

----

== revision ==

The revision provides the technical, unique identification of the installed version. This should not be changed and is intended for use by the developers of TIM.

----

== timestamp ==

This parameter shows when the installed version was developed. This entry should not be changed unless the user is instructed by a technician to do so.

----

== https-protocol ==

The protocol provides the form in which hyperlinks from TIM are sent. This may be either **https** or **http**. http is the standard.

----

== host ==

The host shows the server on which the system is installed. The host can be overwritten in the [[:en:software:tim:client_profile|client profile]].

----

== port ==

This parameter displays the port from which TIM waits for inquiries (i.e.: timserver.corproot.com:**8080**). The port can be overwritten in the [[:en:software:tim:client_profile|client profile]].

----

== externalfilepath ==

In the externalfilepath, [[:software:tim:actionhandler:wordtemplatehandler|word templates]] can be searched for if they are saved as relative paths in the process.\\
> the externalfilepath should point to the path **…serverdefaultdeployloom.earloom-portal.warcustom** in almost all cases!

----

== iotemp ==

This parameter is used to archive temporary data.

----

== default-client ==

This parameter shows which [[:software:tim:client|clients]] are available for a standard user log-in. More detailed information is available [[:en:software:tim:log_in|here]].

----

== Mails ==

Information on creating and managing mails can be found [[:en:software:tim:mail_configuration|here]].

----

== Notes ==

[[:software:tim:notes|this page]] describes how process participants can be informed about attached notes.

<spoiler |Extra Features>

<note important>The following parameters can hav a big impact on the functionality of TIM. If there are any questions or problems, please contact our support.</note>

**Managing the Data Management System (DMS)**\\
\\
The TIM intern Data Management System manages the documents, which are attached to processes, activities and tasks. The DMS's functionality can be affected using the following parameters in the tim.properties.

**Documents can only be attached to open tasks or rather at the processstart** \\
The parameter **dms-user-has-tasks** can determine, if documents can only be attached to open tasks or rather to the processstart. The parameter can be set to **true** or **false**. (s. example).
<code>
dms-user-has-tasks=true
</code>

**Excluding the processmanager from the regulation** It can be useful to exclude processmanagers from this regulation. If the parameter **dms-user-check-processmanager** is set to **true**, it is possible for processmanagers to attach documents at any point in time (s. example). Processmanagers can also delete documents at any point in time.
<code>
dms-user-check-processmanager=true
</code>

**Prohibiting the editing of documents** The Parameter **dms-prevent-docmod-<pd-name>-<activity-name>** can prevent the editing of documents at a specific activity. Replace <pd-name> and <activity-name> with the corresponding processdefinition and activity name (s. example). Special characters as well as blanks have to be replaced with a **-**. **<activity-name>** can be left out, which leads to preventing the editing for the whole process. (The characters "<" and ">" have to be left out)
<code>
dms-prevent-docmod-<process-1>-<activity-1>=true
</code>

**Setting the DMS Provider** The parameter **dms-provider** refers to the used DMS system (s. example).
<code>
dms-provider=sharepoint
</code>

The parameter **dms-provider-username** refers to the user, which is used for signing in into the DMS system.
<code>
dms-provider-username=timtim_service
</code>

Furthermore the parameter **dms-mainprocess-storage** and **dms-mainprocess-storage-filter** determine how the processstorage is accessed and which data is filtered.
<code>
dms-mainprocess-storage=read,write
</code>

<code>
dms-mainprocess-storage-filter=AnyPrefix%
</code>

**Cache**\\
\\
It is possible to automatically empty the brwoser cache for every login by setting the parameter **no-cache** to true. If nothing is stated, the cache will **not** be emptied.
<code>
no-cache=true
</code>

**Standard passwords**\\
\\
It is possible to set and edit the standard password for the Superuser and Client-Administrator

**Standard password Superuser** The parameter ** initpass-super-admin** is used to set the standard password for the superuser, who can create new clients.
<code>
initpass-super-admin=bestAdmin1337
</code>

**Standard password sys.support** The parameter **initpass-super-sys.support** determines the password for the sys.support user.

**Standard password Client-Administrator und User** Every Client is created with a user **admin**. The parameter **initpass-x-admin** determines the passowrd for that user.
<code>
initpass-x-admin=e!|\|*S1cH3r35*|°455w0|27!
</code>

The parameter **initpass-x-others** determines the standard password for all users that are created in that client.

**Client language**\\
\\
It is possible to set in which languages the TIM-Clients are available. The parameter **available-languages** contains all Clientlanguages, seperated with a semicolon (s. example).
<code>
available-languages=de-DE,deutsch;en-GB,english (GB);en-US,english (US);es-ES,español;fr-FR,français;nl-NL,nederlands;
</code>

**Messages in case of external decisions**\\
\\
The setProcessVariableAndSignalProcessinstanceByTransitionName handler allows to make decisions in the process outside of TIM. It can be determined in the tim.properties, which message is displayed in case of a successful or unsuccessful decision. 
<code>
#signal-succeed-response=Your decision regarding ${SYS.PROCESSDEFINITION_NAME} / ${SYS.PROCESSINSTANCE_NAME} / ${SYS.NODEINSTANCE_NAME} was successfully processed.
</code>

<code>
#signal-failed-response=Your decision regarding ${SYS.PROCESSDEFINITION_NAME} / ${SYS.PROCESSINSTANCE_NAME} / ${SYS.NODEINSTANCE_NAME} has not been able to be processed.
</code>

If the corresponding processinstance was already finished or is not existent, it is possible to set corresponding messages with the parameters **signal-failed-pi-ended-response** and **signal-failed-no-pi-response**

**Smartform**\\
\\
In the tim-properties it is possible to set, whether the **TIM SMartform Suite** and the **css Framework Bootstrap** should be active in the Smartform. This can be set with the parameters **form-privder** and **form-bootstrap** respectively.
<code>
form-provider=com.dooris.cba.providers.CbaFormProvider
</code>

<code>
form-bootstrap=false
</code>

**Notes in the Main- and Subprocess**\\
\\
With the parameter **blog-article-inheritance** it is possible, that notes from the mainprocess are available in its subprocess. If the parameter is set to **read** the notes are visible. With **write** notes from the subprocess are attached to its mainprocess, but not to the subprocess. (s. example)
<code>
blog-article-inheritance=write
</code>

**PDF Conversion**\\
\\
The tim.properties contains multiple parameters meant for controlling conversion of documents into PDFs in TIM.

**timPdfConverter** \\
The parameter **timPdrfConverter** contains, which conversion is used (e.g. aspose).
<code>
timPdfConverter=aspose
</code>

**ooHost** \\
The parameter **ooHost** contains the host for the OpenOffice Connector.
<code>
ooHost=localhost
</code>

**ooPort** \\
The parameter **ooPort** contains the port for the OpenOffice Connector.
<code>
ooPort=8100
</code>

**Single Sign On (SSO)**\\
\\
The parameter **registrationForm** determines the site, which is´displayed, if the signed in user has no access to any client. (s. example)
<code>
registrationForm=/loom-portal/super-resource/unauthorized.htm?disposition=inline
</code>

</spoiler>
iGrafx Automation Wiki

User Tools

Site Tools

Page Tools
